Final Fabrications

Skipping Saturday to go 4 wheeling with the club put me behind a full day, but the sunny weather Sunday allowed me to be outside most of the day and put in 10 hours of work. Lots of plugging things back in under the hood, and the big project of mounting the roll bar with the new mounts I had made. This took a test mounting, drilling the final necessary holes, and then taking it off, putting on the rear tub, followed by putting the roll bar back in and properly bolting it in place, in other words, hours of fiddling.

The process went fairly smoothly, including the bolting up of the rear tub. then I mounted the doors and noticed that nothing fit quite right. 2 hours of adjustments, bolt loosening, and redrilling the front tub mounting holes, things now line up correctly between the tub, doors and bulkhead.